Promotion for pre-order X5 mini 60W Box Mod
XVAPE-X5 Mini TC mod 60w
Basic Function:
1.Three buttons: one smoke button, two watt adjustable buttons.2.Power on reset, OLED display: "HELLO";Power off,OLED display "System off"
3.No load:OLED will show "NO ATOMIZER"
4.Loading:OLED will show Resistance,current output watt,voltage,current setting temp and
working mode
5.Screen invertaion: In Starting state,press 3 times smoke button in 2seconds go into menu
state and press "+/-" to choose “SCREEN MODE”
6.Power locked: press the smoke button and the "-"button at the same time and last 5seconds,
OLED show“POWER LOCKED"
7.Power Mod:In Starting state,press 3 times smoke button in 2seconds go into menu state and press "+/-" to choose “POWER MODE”
8.ohm meter: press the "+" and "-" button at the same time and last 3seconds
9.Temperature display switch:In Starting state,press 3 times smoke button in 2seconds go into menu state and press "+/-" to choose “TC MODE”
10.Temperature control design:When current temp up to setting temp, box mod will auto to reduce the output Amp and maintain current temperature
11.No Liquid: OLED will show "No Liquid" if atomizer has no liquid
1.Over puffing protection: when vaping over 10 seconds, the power will be off compulsively, OLED will show "OVER TIME".
2.Low-voltage protection: when the voltage is below 3.2 V, OLED will show "low battery" and flash 5 times,the products need to be charged in time, since low battery cannot support smoking normally.
3.Reverse connection protection: when battery is put at wrong direction, it will not cause any damage to control panel with protection. Take out the battery and put it in the right direction, the product will work normally.
4.Short-circuit protection: when the resistance of the atomzier is below 0.2 ohm, in order to avoid over-heating, the circuit will have a protection automatically, the screen will show "SHORTED".
5.In the high-power working condition: when the voltage of the battery get too low, and cannot support the high output power, the battery's symbol on the screen will keep "flashing". The system will adjust the output power automatically to ensure the battery can be in normal use when the voltage is over 3.3V.
