XVAPE V-ONE 2.0 VAPE PEN OPERATION GUIDE
WHEN USING THE STAINLESS STEEL MOUTHPIECE:
1.Remove the stainless steel mouthpiece, exposing the heating coil.
2.Use the dab tool to putasmall amount of concentrate into the heating element, then put the mouthpiece back onto the base.
3.Click the button 5 times in quick succession to turn XAPE V-ONE 2.0 on. The LED light will flash 3 times indicating the unit is on.
4.Press and hold the button, then inhale slowly and deeply from the mouthpiece.
5.The XVAPEV-ONE 2.0 has 2 different temperature, press the button 3 times to toggle between the two temperature settings.
6.RED LIGHT: Low; GREEN LIGHT: High
WHEN USING THE GLASS BUBBLER ATTACHMENT
1.Take the Glass Bubbler Mouthpiece out from package box, then put on the atomizer base and cover the heating.
2.Use the dab tool to placea small amount of concentrate onto the heating coil.
3.Follow instructions3.,4.,5., from stainlesssteel mouthpiece instructions.
LOWPOWER: The light will flash 10 times and the device will automatically shut off.
FILLING WATER FOR GLASS BUBBLER
1.Fill water to theXVAPE V-ONE 2.0's bubbler from its mouthpiece.
2.The waterlevelcannot be higher than the middle pole in the bubbler.
3.Do not blow, cough or laugh into the mouthpiece during use. Or the device will may be damaged.
CHARGING
1.To protect and extend the battery, Itis recommended to charge your XVAPE V-ONE2.0 vapor pen at least 6 hours before initial use.
2.When plugged in and charging, the redled will be on.
3.The red led willturn offwhen the battery is fully charged.
Warning: XVAPE V-ONE 2.0 CANNOT BE USED WHLE CHARGING. Use while charging isdangerous. After using the V-ONE2.0 concentrate pen or charging, please allow the device to cool down before storage. The V-ONE 2.0 should be stored ina clean dryplace protected against the effects of weather and out of the reach of children.
HEATING COIL CLEANING & COIL REPLACEMENT
1.TO CLEAN YOUR HEATING COIL: While your device is turned off first unscrew your XVAPE V-ONE2.0 heating coil from its corresponding base. You may either use a damp cotton swab to clean your mouthpiece and inside of your heating coil or directly submerge thetwopieces (Mouthpiece and Heating Coil) inisopropy lalcohol.Once clean allow both piecesto air dry or dry offwith a soft cloth or towel.
2.TO REPLACE YOUR HEATING COIL : Simply remove your mouthpiece,and unscrew the current heating coil from the base of the XVAPEV-ONE 2.0.Once the used heating coilhas been removed you may now install the replacement by screwing it directly back into the base. Reinstall mouthpiece.
DO NOT SUBMERGE OR CLEAN BATTERY WITH WATER ORISOPROPYL ALCOHOL.
Aways detach XVAPE V-ONE 2.0 heating coilfrom battery prior to cleaning. (DO NOT TOUCH THE HEATING ELEMENT IMMEDIATELY AFTER USE)
OTHERS
NAME: XVAPE V-ONE 2.0 VAPE PEN
BRAND: XVAPE
MANUFACTURER: TOPGREEN
PRODUCT DETAIL : CHECK XVAPE V-ONE 2.0 VAPE PEN
OFFICIAL WEBSITE: www.topgreen-tech.com
